Instructors

Our review courses are taught by instructors from academia and industry who have their PE licenses; we believe you get the best of both worlds.

Our instructors have previously taught Onsite review courses in several states. They have over 40 years of combined experience teaching engineering exam review courses.

Mrs. Constantino, PE

Mrs. Constantino

Alyssa Santiago Constantino holds a BS in Chemical Engineering from University of Puerto Rico at Mayaguez.  Ms. Santiago is a licensed Professional Engineer in the Commonwealth of Puerto Rico and has more than five years successful hands on experience in process engineering and quality functional areas of regulated healthcare industries.  She has been accountable for chemical reactions and distillation (batch, continuous, azeotropic and extractive) processes’ operation, troubleshooting, project management and optimization providing recommendation for yield, throughput, safety, quality and cost.  Currently, she works as Process Development Engineer in the biotechnology industry.  

Mr. Lewyta, P.E., BCEE

Mr. Lewyta Mr. Lewyta has over 40 years of engineering experience in design and contract/construction management. He worked as a Resident Engineer and project manager for industrial, municipal water, wastewater, and energy/power clients. He has a broad skill set in environmental, health and safety, and regulatory compliance with over 14 years of various experiences from major New York City agencies. Mr. Lewyta holds a NYSDEC 4A Wastewater Operator Certification and is also an AAEES Board Certified Environmental Engineer (BCEE) in water supply and wastewater treatment. After taking a School of PE class to prepare for the Principles and Practice of Engineering exam, Mr. Lewyta passed and became a licensed Professional Engineer in New York. Currently, he teaches both FE and PE refresher courses in civil, environmental, chemical, mechanical, and industrial engineering as well as surveying and architecture classes. Mr. Lewyta teaches several NYS approved continuing education courses offered by the School of PE. He also is a NYSDEC certified wastewater trainer and a NYSERDA certified trainer in energy conservation and sustainability. Mr. Lewyta holds a BS and MS in Mechanical Engineering from Union College in Schenectady, New York.

Mr. Olson, P.E.

Mr. Olson Mr. Olson has a bachelor’s degree in Chemical Engineering with a minor in Electrical Engineering. He has many certifications including Professional Engineer and LEEP AP O+M. He has passed both the Chemical exam and Mechanical Thermo and Fluid Systems exam. He has many years of experience in process design, chemical manufacturing, regulation compliance, wastewater, instrumentation, and software engineering. Mr. Olson teaches both fluid mechanics for Mechanical Engineers and thermodynamics for Chemical Engineers. 

Dr. Proctor, PhD, P.E.

Dr. Proctor Dr. Proctor is a graduate of Purdue University, West Lafayette, Indiana with BS, MS, and PhD degrees in Mechanical Engineering. In his 19 year tenure as professor at the University of Florida, Dr. Proctor taught thermodynamics, fluid mechanics, gas dynamics, heat and mass transfer, combustion, instrumentation, finite element methods, vibrations, mechanical design, biometrics, codes and standards, analytical methods, and machine analysis and design. At UF, Dr. Proctor performed research in laser ignition, holography, flame structure and emission analysis, and biomechanics. Dr. Proctor served the state of Florida as member of the Board of Directors for the Florida Engineers Management Corporation. Dr. Proctor is Past-Vice President of Professional Practice for ASME, and he currently serves as Commissioner to ABET representing SAE and has been involved in the review of over 30 programs. Dr. Proctor was an ex-officio member of the NCEES Committee on Examinations for Professional Engineers, and member of the NCEES Task force on Engineering Licensure Qualifications. Dr. Proctor is currently a forensic engineering consultant with 30 years of testifying experience. Dr. Proctor’s has proven teaching experience in Hydraulics and Fluids, and Mechanical Systems and Materials at School of PE.

Mr. Saeed, P.E.

Mr. Saeed Mr. Saeed has a bachelor’s degree in Chemical Engineering and a master’s degree in Environmental Engineering. He is a licensed Professional Engineer in NY. He has over 10 years of design experience for both chemical engineering and environmental engineering projects. He teaches multiple courses including Mass Transfer and Separation, Chemical Reaction Engineering, and Chemistry for both the PE and FE exams.

Mr. Stankiewicz, PE

Mr. Stankiewicz Mr. Stankiewicz has two undergraduate degrees and a Master’s degree in management with over 35 years’ experience in the construction industry. Specializing in general building construction, he has played an active executive role in the construction of nearly a billion dollars of projects within the public and private sectors. His broad background in projects engaged with the Federal, State, and Local governments, Universities, and major corporate clients have strengthened his skills as a leader. As an adjunct instructor for the Graduate School of Engineering at a major East Coast Technology Institute, he taught courses in Construction Management, Systems in Building Design (Civil-M/E/P/F), and Project Scheduling. He has over seven years teaching experience. At School of PE, Mr. Stankiewicz has proven teaching experience in Surveying, Construction, Materials, Engineering Economics, and Project Management. 

Mr. Tumu, PE, PMP, CSM, MCP

Mr. Tumu Mr. Tumu has a Bachelor’s Degree in Chemical Engineering and a Master’s Degree in Civil and Environmental Engineering. He has over 33 years of significant and successful experience in pharmaceutical production management, plant start-up, project management, engineering field, operations, chemical process development, process scale-up, technology transfer from pilot plant to bulk production and trouble shooting, sales support, customer relations, design and implementation. He also has several years of experience in developing, teaching, coaching and training Chemical Engineers, Process Engineers, and Chemical Operators in custom Pharmaceutical/Chemical Manufacturing from Pilot scale to Bulk production. Mr. Tumu has proven teaching experience in Plant Design and Operations at School of PE. 


View all School of PE Instructors
FE,PE Review Courses