Instructors

Our Review Courses are taught by instructors from academia and industry ... we believe you get the best of both worlds.

Our instructors have previously taught Review Courses in several states and live online classes for which students have attended from several states across the country. The background information on our instructors is provided below:

Mr. Douty, PS

Mr. Douty Mr. Douty, has been a surveyor since 1968, and holds a license to practice as a Professional Land Surveyor in Virginia and has been licensed in five other states.  He is an Army Veteran, holds a B.S. degree in civil engineering, is trained as a mediator, and Geographic Information Systems specialist.  Mr. Douty is a member and past President of the Virginia Association of Surveyors, and the National Society of Professional Surveyors.  Mr. Douty is a frequent lecturer on land surveying topics, and has provided continuing education lectures and seminars for Professional Surveying Societies of North Carolina, Maryland and Virginia.  He is also a member of several college advisory boards, and teaches as adjunct faculty at several colleges and universities. 

Dr. Foinquinos, PhD, P.E.

Dr. Foinquinos

Dr. Foinquinos holds a BS in Civil Engineering and a MS and PhD in Structural Engineering with a specialization in Structural Dynamics. He has 15 years of structural engineering practice which has been focused on bridge design: concrete, pre-stressed concrete, and steel. Dr. Foinquinos has taught courses in steel design, finite elements, and masonry design along with PE refresher courses at Florida International University (FIU). Dr. Foinquinos has published a chapter in the book titled “Wave Propagation in Continuous Media.”

Mr. Lewyta, P.E., BCEE

Mr. Lewyta Mr. Lewyta has over 40 years of engineering experience in design and contract/construction management. He worked as a Resident Engineer and project manager for industrial, municipal water, wastewater, and energy/power clients. He has a broad skill set in environmental, health and safety, and regulatory compliance with over 14 years of various experiences from major New York City agencies. Mr. Lewyta holds a NYSDEC 4A Wastewater Operator Certification and is also an AAEES Board Certified Environmental Engineer (BCEE) in water supply and wastewater treatment. After taking a School of PE class to prepare for the Principles and Practice of Engineering exam, Mr. Lewyta passed and became a licensed Professional Engineer in New York. Currently, he teaches both FE and PE refresher courses in civil, environmental, chemical, mechanical, and industrial engineering as well as surveying and architecture classes. Mr. Lewyta teaches several NYS approved continuing education courses offered by the School of PE. He also is a NYSDEC certified wastewater trainer and a NYSERDA certified trainer in energy conservation and sustainability. Mr. Lewyta holds a BS and MS in Mechanical Engineering from Union College in Schenectady, New York.

Dr. Proctor, PhD, P.E.

Dr. Proctor Dr. Proctor is a graduate of Purdue University, West Lafayette, Indiana with BS, MS, and PhD degrees in Mechanical Engineering. In his 19 year tenure as professor at the University of Florida, Dr. Proctor taught thermodynamics, fluid mechanics, gas dynamics, heat and mass transfer, combustion, instrumentation, finite element methods, vibrations, mechanical design, biometrics, codes and standards, analytical methods, and machine analysis and design. At UF, Dr. Proctor performed research in laser ignition, holography, flame structure and emission analysis, and biomechanics. Dr. Proctor served the state of Florida as member of the Board of Directors for the Florida Engineers Management Corporation. Dr. Proctor is Past-Vice President of Professional Practice for ASME, and he currently serves as Commissioner to ABET representing SAE and has been involved in the review of over 30 programs. Dr. Proctor was an ex-officio member of the NCEES Committee on Examinations for Professional Engineers, and member of the NCEES Task force on Engineering Licensure Qualifications. Dr. Proctor is currently a forensic engineering consultant with 30 years of testifying experience. Dr. Proctor’s has proven teaching experience in Hydraulics and Fluids, and Mechanical Systems and Materials at School of PE.

Mr. Siegl, P.E.

Mr. Siegl

Nicholas G. Siegl, is a project manager with Gannett Fleming, Inc. He resides in the Harrisburg, Pennsylvania area and is a licensed Professional Engineer in Pennsylvania, Delaware, and Texas. He has over 34 years of transportation design experience.
His training experience includes the development and delivery of training courses for the Pennsylvania Department of Transportation (PennDOT), Penn State University, and the School of PE. He has taught review courses for the civil PE exam since 1999, and has served as an instructor for the School of PE since 2005. His area of expertise is in highway design and construction engineering. He serves as a subject matter expert for the development of PennDOT’s Intermediate Highway Design Skills Course, and the Right-of-Way for Project Managers Course. Mr. Siegl also served as lead instructor for the Basic Highway Design Skills Course, which introduces entry-level engineers to the PennDOT’s Highway Design Manual and the AASHTO Green Book. He has also serves as co-instructor of the PennDOT’s Design Exceptions Course.

Mr. Stankiewicz, PE

Mr. Stankiewicz Mr. Stankiewicz has two undergraduate degrees and a Master’s degree in management with over 35 years’ experience in the construction industry. Specializing in general building construction, he has played an active executive role in the construction of nearly a billion dollars of projects within the public and private sectors. His broad background in projects engaged with the Federal, State, and Local governments, Universities, and major corporate clients have strengthened his skills as a leader. As an adjunct instructor for the Graduate School of Engineering at a major East Coast Technology Institute, he taught courses in Construction Management, Systems in Building Design (Civil-M/E/P/F), and Project Scheduling. He has over seven years teaching experience. At School of PE, Mr. Stankiewicz has proven teaching experience in Surveying, Construction, Materials, Engineering Economics, and Project Management. 


View all School of PE Instructors
FE,PE Review Courses