Instructors

Dr. Chandy holds a MS in Aerospace Engineering from University of Florida and a PhD in Mechanical Engineering from Purdue University. He has been a teaching courses at the University of Akron as an assistant professor for more than six years. Dr. Chandy has been conducting research primarily in computational fluid dynamics and teaching fluid mechanics, heat transfer and numerical methods. He has proven experience teaching fluid mechanics, heat and mass transfer, computational tools and ethics at School of PE.

Mr. Flynn graduated from Washington University in St. Louis with a Bachelor’s Degree in Mechanical Engineering, and he received his Masters of Business Administration in Finance and Accounting from the University of Houston. Mr. Flynn has been practicing engineering for over 33 years. He is currently a Forensic Investigator and Professional Engineer licensed in 22 states. In his home state of Texas, Mr. Flynn is listed in the Civil, Electrical, and Mechanical disciplines. Mr. Flynn is also a Certified Industrial Hygienist (CIH) by the American Board of Industrial Hygiene (ABIH), and a Certified Fire and Explosion Investigator (CFEI) by the National Association of Fire Investigators (NAFI). Mr. Flynn has been teaching coursework for the School of PE since 2008. At School of PE, Mr. Flynn has proven experience teaching Thermodynamics, Power, Heat Transfer and Exchanger, Material Science and Economics.

Dr. Brian J. Galli works as an Assistant Professor of Project Management and Management Engineering at Long Island University – Post. He holds a PhD in Engineering Management from Old Dominion University. He also holds a BS in Industrial Engineering from Binghamton University (SUNY Binghamton), as well as MS in Engineering Management from Missouri University of Science & Technology. He is a licensed Professional Engineer in New York state and holds a certification as a Lean Bronze, Lean Six Sigma Blackbelt, Project Management Professional (PMP), Professional in Engineering Management (PEM), and an Improvement Advisor (IHI).

Mr. Galli's  work has been published in a variety of publications, and it has been presented at several venues and professional organizations including Institute of Industrial & Systems Engineers (IISE), American Society for Quality (ASQ), American Quality Institute (AQI), Society for Health Systems (SHS), American Society for Engineering Management (ASEM), Project Management Institute (PMI).

Mr. Haygood has taught for the School of P.E. since 2007.   He specializes in Mechanical Engineering topics such as Statics, Dynamics, Mechanics of Materials, Thermodynamics, and HVAC.  Mr. Haygood is a Consulting Mechanical Engineer in the fields of product testing and forensic engineering.  As an engineer accident investigator, Mr. Haygood has performed reconstructions and given testimony regarding ATV, Personal Watercraft, Heavy Trucking, motorcycle, and other vehicle accidents.  Mr. Haygood is a private pilot, motorcycle rider, and mechanic on his own time.

Mr. Joshi has a Bachelor of Engineering Science Degree in Mechanical. He has been practicing engineering for over 27 years which includes five years of teaching experience. Mr. Joshi has proven experience in teaching Statics and Dynamics, Mechanics of Materials, and Strength of Materials at School of PE.

Dr. Kommalapati holds a BS  in Civil Engineering and a MS and PhD in Environmental Engineering. He has more than 18 years of teaching and research experience at a public university. Dr. Kommalapati has proven teaching experience in fluid mechanics, environmental-water and wastewater, chemistry, and ethics at School of PE. 

"Mr. Drew Lewis, P.E. is a project manager with 11 years of experience in the environmental services and engineering consulting industries. A graduate of Stevens Institute of Technology, Mr. Lewis holds a Bachelor of Engineering in Civil Engineering, and has practiced as a licensed Professional Engineer in the state of New Jersey since 2018.

Mr. Lewis’s areas of expertise include the permitting, design, construction, operation, closure, and post-closure compliance of solid waste/sanitary landfill facilities located throughout New Jersey, as well as in site assessment and remediation of contaminated sites in New York and New Jersey. 

Mr. Lewis participated in the School of PE review course for the Environmental P.E. exam (2018), and credits the rigorous preparation and thorough materials provided by the instructors at School of PE for his success on the exam."

Mr. Marchesseault is originally from Montana where he obtained his BS in Electrical Engineering from Montana State University (MSU) in 1988.  Upon graduating from MSU, he spent six years as an officer in the US Navy operating nuclear power plants on aircraft carriers.  Following his Navy career, Mr. Marchesseault worked in Silicon Valley for 13 years in the high tech industry developing semi-conductor capital equipment.  After getting married and starting a family, he wanted to move to the country, and he shifted careers to the electric utility industry. After working nearly three years in the wind industry managing wind parks in  California, he moved to a municipal utility in Lodi, California where he manages the engineering and operations department for Lodi Electric Utility. While at Lodi Electric Utility, Mr. Marchesseault obtained his Professional Engineer license in Electrical and Computer: Power.

Mr. Olson has a bachelor’s degree in Chemical Engineering with a minor in Electrical Engineering. He has many certifications including Professional Engineer and LEEP AP O+M. He has passed both the Chemical exam and Mechanical Thermo and Fluid Systems exam. He has many years of experience in process design, chemical manufacturing, regulation compliance, wastewater, instrumentation, and software engineering. Mr. Olson teaches both fluid mechanics for Mechanical Engineers and thermodynamics for Chemical Engineers. 

Mr. Oyatayo has a B.S. in Mechanical Engineering, an M.S. in Systems Engineering, and an M.B.A. in General Business. He has over 15 years of work experience in different industries, including oil & gas, theme park entertainment, aerospace & defense, and tech. Mr. Oyatayo has been teaching multiple engineering subjects for School of PE since 2014.

Dr. Petracca has a BS in Electrical Engineering, a MS in Telecommunication Engineering, and a PhD in Computer Engineering. He has been teaching undergraduate and graduate courses for nine years. At School of PE, Dr. Petracca has proven teaching experience in Mathematics and Probability and Statistics.

Dr. Proctor is a graduate of Purdue University, West Lafayette, Indiana with BS, MS, and PhD degrees in Mechanical Engineering. In his 19 year tenure as professor at the University of Florida, Dr. Proctor taught thermodynamics, fluid mechanics, gas dynamics, heat and mass transfer, combustion, instrumentation, finite element methods, vibrations, mechanical design, biometrics, codes and standards, analytical methods, and machine analysis and design. At UF, Dr. Proctor performed research in laser ignition, holography, flame structure and emission analysis, and biomechanics. Dr. Proctor served the state of Florida as member of the Board of Directors for the Florida Engineers Management Corporation. Dr. Proctor is Past-Vice President of Professional Practice for ASME, and he currently serves as Commissioner to ABET representing SAE and has been involved in the review of over 30 programs. Dr. Proctor was an ex-officio member of the NCEES Committee on Examinations for Professional Engineers, and member of the NCEES Task force on Engineering Licensure Qualifications. Dr. Proctor is currently a forensic engineering consultant with 30 years of testifying experience. Dr. Proctor’s has proven teaching experience in Hydraulics and Fluids, and Mechanical Systems and Materials at School of PE.

Mr. Saeed has a bachelor’s degree in Chemical Engineering and a master’s degree in Environmental Engineering. He is a licensed Professional Engineer in NY. He has over 10 years of design experience for both chemical engineering and environmental engineering projects. He teaches multiple courses including Mass Transfer and Separation, Chemical Reaction Engineering, and Chemistry for both the PE and FE exams.

Mr. Stankiewicz has two undergraduate degrees and a Master’s degree in management with over 35 years’ experience in the construction industry. Specializing in general building construction, he has played an active executive role in the construction of nearly a billion dollars of projects within the public and private sectors. His broad background in projects engaged with the Federal, State, and Local governments, Universities, and major corporate clients have strengthened his skills as a leader. As an adjunct instructor for the Graduate School of Engineering at a major East Coast Technology Institute, he taught courses in Construction Management, Systems in Building Design (Civil-M/E/P/F), and Project Scheduling. He has over seven years teaching experience. At School of PE, Mr. Stankiewicz has proven teaching experience in Surveying, Construction, Materials, Engineering Economics, and Project Management.